The Rasmussen Classic Ventless CoalFire System is a complete set of vent free coals with a burner and basket that will accent your Victorian fireplace! The coals are made from a refractory cement with no harmful ceramic fibers.

CoalFire System Includes

  • Coals
  • Burner
  • Basket
  • Control of choice


The burner is a state of the art lanced-port opposed louver burner that will heat your room efficiently. 

There are three burner lighting/control options with this system. 

  • Manual Control: Turn the valve knob to light the burner(s) and control the flame height.
  • Remote Ready: Comes with a latching solenoid system that control the on/off of the burner(s) with a wireless device (sold separately).
  • Variable Flame Control: This motor drive system control the on/off and flame height with an included hand-held remote transmitter

  • Chillbuster logo
    "EASY" Safety Control System

    All Chillbster Vent-Free/Reduced Vent Hearth Kits utilize a standing ODS pilot, which is lighted manually by pushing in the valve knob while depressing the piezo spark igniter. 

    Battery power from the receiver operates the ON/OFF functions of the "SE" and RE" systems.  The safety function is powered by a thermocouple ODS pilot, which is 
    not dependent on the inconsistencies of thermopiles.  Changing batteries is much easier than replacing a thermopile.

     All EASY Control options use the same valve body. This means that "ME" models may be upgraded to either "SE" or "RE" functionality with the addition of either the SE-UP1 or RE-UP1 upgrade kits.  If you desire, you can purchase a manual control now and upgrade to remote functionality at a later date.  Conversion can be down in place (no need to send the unit back to the factory), as each EASY valve is safety seal equipped, which prevents leakage of gas when upgrading.  Conversion is easy for anyone who can read instructions.

    Should a solenoid or motor drive fail, the valve can be operated as a manual control (once the solenoid or motor drive is removed) until a replacement part is obtained.  No down time!

    1) Manual ("ME")
     Turn the valve knob to light the burner and to control the flame height.

    2) Variable Flame Height Remote Control ("RE")
      Motor drive system that controls the ON/OFF and flame height with the hand-held remote transmitter (included).

    3) Remote Ready ON/OFF Remote Control ("SE")
      Latching solenoid system that controls the ON/OFF of the burner(s) with one of five
    Wireless Remote Transmitter Devices (sold separately but necessary to operate the system - see below). "SE" is not a "millivolt" system.

    Transmitter Device Options - Sold separately, but needed to operate system.

    SR-2R  Simple ON/OFF 
    Hand-Held Remote

    THR-2R  ON/OFF with
    Thermostat Hand-Held Remote

    TS-2R  Wireless 
    Wall Thermostat

    WS-2R  Wireless 
    Wall Switch

    WT-2R  Wireless 
    Wall Timer
    30-60-90 minutes

    RH3  Smooth-Sided
    Ceramic Log House
    to protect SE and RE 
    Receivers from heat